Transfer Protocol; Address Book - Xerox WorkCentre 7132 User Manual

5 Scan/E-mail
Password
Allows you to specify the password if required by the destination server. Select a server
from the address book to display the preset password or select [Password] and enter
a password using the [Keyboard] screen. Leave the password field blank if you do not
want to assign a password.

Transfer Protocol

This feature allows you to select the transfer protocol. You must select the same
protocol used by the destination.
1.
Select [Transfer Protocol] on the
[Scan to FTP/SMB] screen.
2.
Select the required option.
3.
Select [Save].
FTP
Specifies the FTP protocol.
SMB
Specifies the SMB protocol.
SMB (UNC Format)
Specifies the SMB protocol (using the UNC format).
NOTE: If Remote Authentication has been enabled, a popup message will prompt the
user to enter a login and password before using the Scan to FTP/SMB feature. The
login and password will be passed to the Kerberos server. Only when the user has
been authenticated (for example, User xyz really is user xyz), the feature will be made
available.

Address Book

This feature allows you to select a destination server from the address book. Selecting
a server causes the preset information to be entered into the entry fields: Server,
Shared Name, Save In, Login Name, and Password. For information on how to register
destinations, refer to Address Book in the Setups chapter on page 290.
1.
Select [Address Book] on the
[Scan to FTP/SMB] screen.
2.
Select the required option.
3.
Select [Save].
Details
Displays the detailed settings of the selected server.
128 Xerox WorkCentre 7132 User Guide