Lock Lever B / Lock Lever Assy; Ccd Module - Konica Minolta bizhub 20 Service Manual

9.10.3 Lock Lever B / Lock Lever ASSY

(1) Remove the cup B M3x6 Taptite screw, and then remove the Lock lever B.
(2) Remove the two cup B M3x6 Taptite screws, and then remove the Lock lever ASSY.
Assembling Note:
• After moving the Lock lever ASSY to "A" direction, assemble "B" of the Lock lever B
that is to the direction of the top cover rib in touch.
Taptite B M3x6
Lock lever ASSY

9.10.4 CCD Module

(1) Push the Pulley ASSY to the direction of the arrow 1a and remove the Belt.
Taptite B M3x6
Lock lever B
"A"
Fig. 5-98
Belt
1a
Pulley ASSY
Fig. 5-99
5-86
Lock lever ASSY
Lock lever B
"B"
1b
Confidential