Brake Master Cylinder Disassembly; Brake Master Cylinder Assembly - KYMCO DINK 125 Service Manual

14.HANDLEBAR/FRONT WHEEL/FRONTBRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
DISASSEMBLY
Remove the piston rubber cover and snap
ring from the brake master cylinder.
Remove the washer, main piston and spring
from the brake master cylinder.
Clean the inside of the master cylinder and
brake reservoir with brake fluid.
ASSEMBLY
Before assembly, apply brake fluid to all
removed parts.
Install the spring together with the 1st rubber
cup.
＊
• During assembly, the main piston and
spring must be installed as a unit
without exchange.
• When assembling the piston, soak the
cups in brake fluid for a while.
• Install the cups with the cup lips facing
the correct direction.
Install the main piston, spring and new snap
ring.
Install the new rubber cover.
Snap Ring
Snap Ring Pliers (Close)
Spring
Master Cylinder
Snap Ring
DINK 50/125
Main Piston
Rubber Cover
14-22