Clutch/Driven Pulley Inspection - KYMCO DINK 125 Service Manual

8
. DRIVE AND DRIVEN PULLEYS/
DINK 50/125
KICK STARTER
Remove the seal collar.
Seal Collar
Driven Pulley
Pull out the guide roller pins from the driven
pulley and then remove the O-rings and oil
seal from the driven pulley.
O-rings
Guide Roller Pin
CLUTCH/DRIVEN PULLEY
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit: 107.5mm replace if below
8-32