Front Lower Cover; Rear Fender; Body Cover - KYMCO DINK 125 Service Manual

2
. EXHAUST MUFFLER/FRAME COVERS
DINK50/125

FRONT LOWER COVER

Remove the front cover (see page 2-8).
Remove the foot skirt (see page 2-9).
Remove the six screws and front lower cover.
Remove the 2 screws---(1)
Installation is in the reverse order of removal.

REAR FENDER

(1)
Remove the two bolts and two nuts, then
remove the rear fender.
Installation is in the reverse order of removal.

BODY COVER

Remove the center cover (see page 2-5).
Remove the right and left foot skirts (see
page 2-9).
Remove the rear fender (see page 2-10).
Remove the rear spoiler and rear spoiler stay
(see page 2-5).
Remove the two screws, then remove the
body cover.
2-10