Thermostat Inspection; Thermostat Technical Data; Thermostat Assembly - KYMCO DINK 125 Service Manual

12
. COOLING SYSTEM
INSPECTION
Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open
Full-open
Valve lift
＊
• Do not let the thermostat touch the pan
as it will give a false reading.
• Replace the thermostat if the valve
stays open at room temperature.
•Test the thermostat after it is opened for
about 5 minutes and holds the
temperature at 70℃.
ASSEMBLY
Thermostat assembly is in the reverse order
of disassembly.
80 - 82°C (176 -
180°F)
90°C (198°F)
3.5 mm (0.14 in)
minimum
Thermostat
O-ring
Thermostat Housing
DINK50/ 125
Thermometer
12-22