Final Reduction - Service Information; Final Reduction Specifications; Final Reduction Troubleshooting; Final Reduction(Dink 125) - KYMCO DINK 125 Service Manual

9
. FINAL REDUCTION
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The servicing operations of this section can be made with the engine installed.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.2 liter (0.17 lmp qt, 0.21 US qt)---DINK 125
At change
At disassembly : 0.12liter ---DINK 50
At change
TORQUE VALUES
Transmission case cover bolt
SPECIAL TOOLS
Oil seal and bearing installer
Bearing puller
TROUBLESHOOTING
Engine starts but motorcycle won't move
• Damaged transmission
• Seized or burnt transmission
Abnormal noise
• Worn, seized or chipped gears
• Worn bearing
Oil leaks
• Oil level too high
• Worn or damaged oil seal
9-3
: 0.18 liter(0.16 lmp qt, 0.19 US qt)---DINK 125
: 0.11liter ---DINK 50
1.4 kgf-m (14 N-m, 10 lbf-ft)
A120E00014
A120E00037
DINK 125/50