Engine Oil Level Check; Engine Oil Replacement - KYMCO DINK 125 Service Manual

3
. INSPECTION/ADJUSTMENT

Engine oil level check

Check the engine oil level each day before
riding the scooter.
The level must be maintained between the
upper (1) and lower level (2) marks on the oil
filler cap/dipstick.
1. Start the engine and let it idle for a few
minutes.
2. Stop the engine and put the scooter on its
center stand on level ground.
3. After a few minutes, remove the oil filler
cap/dipstick, wipe it clean, and reinsert the
oil filler cap/dipstick without screwing it
in. Remove the oil filler cap/dipstick. The
oil level should be between the upper and
lower marks on the oil filler cap/dipstick.
4. If required, add the specified oil up to the
upper level mark. Do not overfill.
5. Reinstall the oil filler cap/dipstick. Check
for oil leaks.
＊
Let the engine and exhaust system cool
before working in those areas.

Engine oil replacement

Engine oil quality is the chief factor affecting
engine service life. Change the engine oil as
specified in the maintenance schedule.
When running in very dusty conditions, oil
changes should be performed more frequently
than specified in the maintenance schedule.
Please dispose of used engine oil in a manner
that is compatible with the environment. We
suggest you take it in a sealed container to
your local recycling center or service station
for reclamation. Do not throw it in the trash
or pour it on the ground or down a drain.
DINK 50
DINK 125
DINK50/125
Dipstick/Oil Filler Cap
3-6