12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
BRAKE MASTER CYLINDER
Removal
First drain the brake fluid from the hydraulic
brake system.
*
When servicing the brake system, use
shop towels to cover rubber and plastic
parts and coated surfaces to avoid
being contaminated by brake fluid.
When removing the brake fluid pipe
bolt, be sure to plug the pipe to avoid
brake fluid leakage.
Disassembly
Remove the piston rubber cover and snap ring
from the brake master cylinder.
Remove the washer, main piston and spring
from the brake master cylinder.
Clean the inside of the master cylinder and
brake reservoir with brake fluid.
12-9
Brake Master Cylinder
Snap Ring
Spring
Main Piston
Snap Ring
Super 8 50
Bolts
Master Cylinder