Headlight Aim; Clutch Shoe Wear - KYMCO DINK 125 Service Manual

3
. INSPECTION/ADJUSTMENT

HEADLIGHT AIM

Remove the rubber plug (1) to expose the
screw (2).
Headlight aim can be made by turning the
screw in or out as necessary.
Obey local laws and regulations.

CLUTCH SHOE WEAR

Start the engine and check the clutch
operation by increasing the engine speed
gradually.
If the scooter tends to creep, or the engine
stalls, check the clutch shoes for wear and
replace if necessary (refer to the "DRIVE
PULLEY, DRIVE BELT AND DRIVEN
PULLEY" section in the chapter 8).
3-19
DINK50/125