Air Cut-Off Valve (Acv) Removal - KYMCO DINK 125 Service Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
AUTO BYSTARTER INSPECTION
Check the auto bystarter valve and needle for
nicks, wear or damage.
If any faulty part is found, replace the auto
bystarter with a new one.
AIR CUT-OFF VALVE (A.C.V.)
REMOVAL
Remove the two screws and then remove
throttle cable holder.
Remove the two screws and the air cut-off
valve cover.
Remove the spring, diaphragm and O-rings.
Inspect the diaphragm and spring for wear or
damage.
13-35
By-starter Needle
Screws
O-ring
Diaphragm Spring
DINK 50/125
By-starter Valve
Screws
Cut-off Valve Cover
Cut-off Valve Cover