KYMCO DINK 125 Service Manual page 278

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
Pull float pin outs, then remove the float and
float valve.
Remove the slow jet.
Remove main jet.
Remove the needle jet holder and needle jet.
Remove the pilot screw, spring, washer and
O-ring.
＊
Before pilot screw removal, slowly turn
the pilot screw clockwise and count the
number of turns until the screw is
lightly seated. Make a note of how
many turns were made so the screw can
be reset correctly.
13-11
Float
Float Valve
Slow Jet
Main Jet/Needle Jet Holder/Needle Jet
Pilot Screw/Spring/Washer/O-ring
DINK 50/125
Float Pin