Carburetor Body Cleaning - KYMCO DINK 125 Service Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK

CARBURETOR BODY CLEANING

Blow compressed air through all passages of
the carburetor body.
＊
• Make sure that no fuel jet is clogged.
Install the O-ring onto the air-cut-off valve
body securely.
＊
• Install the O-ring with the flat face
toward the valve body side.
Install the diaphragm, spring, and cover.
Install and tighten the two screws attaching
the air cut-off valve cover.
Install the throttle cable holder and tighten the
two screws.
O-ring
Diaphragm Spring
Screws
DINK 50/125
Cut-off Valve Cover
Screws
Cut-off Valve Cover
13-36