Final Reduction Disassembly (Dink 50); Final Reduction Inspection (Dink 50) - KYMCO DINK 125 Service Manual

9
. FINAL REDUCTION
DINK 125/50
Bolts
FINAL REDUCTION DISAS-
SEMBLY(DINK 50)
Remove the rear wheel.
Remove the left crankcase cover.
Remove the clutch/driven pulley.
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Driver shift
Final Gear
Driver shift
Remove the final gear and countershaft.
Countershaft Final Shaft Dowel Pin
Countershaft
FINAL REDUCTION INSPECTION
Inspect the countershaft and gear for wear
or damage.
9-10