Rear Brake Assembly - KYMCO DINK 125 Service Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
Remove the brake cam bolt to remove the
brake arm, wear indicator plate and felt seal.
Remove the brake arm.

REAR BRAKE ASSEMBLY

Apply grease to the anchor pin and brake
shoe moving parts.
Apply grease to the brake cam and install it.
Apply engine oil to the felt seal and install it
to the brake cam.
Install the wear indicator plate.
＊
Align the wide tooth of the wear
indicator plate with the wide groove on
the brake cam.
Install the brake arm onto the brake cam.
＊
Align the punch mark on the brake arm
with the scribed line on the brake cam.
Install and tighten the brake arm bolt.
Install the brake arm return spring.
Install the brake shoes.
15-29
Wear Indicator Plate
Brake Arm
Grease
Wear Indicator Plate
Brake Arm
DINK 50/125
Brake Arm Bolt
Brake Cam
Punch Mark