17
. IGNITION SYSTEM
Disconnect the ignition coil primary
connectors (2).
Remove the bolt (3) and the ignition coil (4).
Installation is in the reverse order of removal.
CDI
REMOVAL/INSTALLATION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the CDI connectors (1) and
remove the CDI (2).
RESISTANCE INSPECTION
Measure the resistance between the terminals.
*
Due to the semiconductor in circuit, it
is necessary to use a specified tester for
accurate testing. Use of an improper
tester in an improper range may give
false readings.
DINK 50/125
17-6