Handlebar Switch Inspection; Right Handlebar Switch - KYMCO DINK 125 Service Manual

19. LIGHTS/METERS/SWITCHES
HANDLEBAR SWITCH
INSPECTION
Remove the front cover (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).

Right handlebar switch

Disconnect the right handlebar switch
connector and check for continuity at switch
side connector terminals.
Continuity should exist between the color
code wires as follows:
19-7
Engine Stop Switch (DINK 125 only)
Lighting Switch
(DINK 125 only)
DINK 50/125
Starter Switc
h