Oil Pump (Dink 50) Removal - KYMCO DINK 125 Service Manual

4
. LUBRICATION SYSTEM
OIL PUMP (DINK 50)
REMOVAL
Place a container under the engine.
Remove the drain plug to drain the oil. ( 3-
8)
Remove the A.C. generator flywheel. ( 8 -3)
Remove the A.C. generator stator and pulsar
coil. ( 8 -3)
Remove the eight right crankcase cover bolts
and the right crankcase cover.
Remove the oil pump gear nut and oil pump
gear.
emove three oil pump mounting bolts and the
oil pump.
Bolts
Right Crankcase Cover
Nut
Bolts
Oil Pump
DINK 50/125
Bolts
Bolts
Oil Pump Gear
4-8