8
. DRIVE AND DRIVEN PULLEYS/
DINK 50/125
KICK STARTER
DRIVEN PULLEY INSPECTION
Grooves
Check the driven pulley for smooth
operation.
If any scratches or damage is found then
replace as a set.
Check the torque cam grooves for wear or
damage.
Check guide pins and rollers for wear or
damage.
If any scratches or damage is found then
Guide Pins
replace as a set.
Check the spring for damage.
Measure the spring free length.
Service limit: 83.2 mm (3.328 in)
Check the clutch shoe for heat damage.
Measure the clutch shoe thickness.
Service limit (A): 2 mm (0.08 in)
8-20