Carburetor Installation - KYMCO DINK 125 Service Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK

CARBURETOR INSTALLATION

Tighten the drain screw.
Install the carburetor onto the intake manifold
and tighten the band screw.
Install the air cleaner connecting tube and
tighten the band screw.
Connect the throttle cable to the carburetor.
＊
• After connecting the throttle cable,
adjust the throttle grip free play to 2～
6mm.
Connect the fuel tube and vacuum tube to the
carburetor.
Band Screws
Lock Nut Adjusting Nut
Throttle Cable
Fuel Tube
DINK 50/125
13-40