Rear Brake Check; Rear Brake Lining Inspection; Rear Brake Disassembly - KYMCO DINK 125 Service Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
REAR BRAKE
Remove the rear wheel.
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limit: 95.5mm replace if over
BRAKE LINING INSPECTION
Measure the brake lining thickness.
Service Limit: 2.0mm replace if below
＊
Keep oil or grease off the brake linings.

REAR BRAKE DISASSEMBLY

Remove the rear brake adjusting nut and
disconnect the rear brake cable.
Remove the rear brake shoes.
Brake Arm
Adjusting Nut
DINK50/125
Brake Shoes
15-28