8
. DRIVE AND DRIVEN PULLEYS/
DINK 50/125
KICK STARTER
DRIVE PULLEY, DRIVE BELT
AND DRIVEN PULLEY
REMOVAL
Remove the left crankcase cover (refer to the
"LEFT CRANKCASE COVER" section in this
Nut/Ratchet
chapter).
Use the special tool to hold the drive pulley,
then remove the nut and ratchet.
Special tool:
Universal holder
A120E00017
Remove the drive pulley face.
Drive Pulley Face
Universal Holder
Hold the clutch outer with the universal
holder and remove the clutch outer nut.
Special tool:
Universal Holder
A120E00017
Nut
Universal Holder
Clutch Outer/Driven Pulley Assembly
Remove the clutch outer, driven pulley
assembly and drive belt together.
Drive Belt
8-10