Inner Cover - KYMCO DINK 125 Service Manual

Hide thumbs Also See for DINK 125:
Table of Contents

Advertisement

2
. EXHAUST MUFFLER/FRAME COVERS
DINK50/125

INNER COVER

Remove the front cover (see page 2-8).
Remove the front lower cover (see page 2-
10).
Remove the floorboard (see page 2-11).
Turn the fuel fill cap garnish
counterclockwise and remove it.
Turn the ignition key garnish
counterclockwise and remove it.
Remove the bolt.
Cap Garnish
Key Garnish
Remove three screws and disconnect the fuel
fill duct.
Remove the two screws, then remove the
inner cover.(DINK 125 only)
Installation is in the reverse order of removal.
2-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dink 50

Table of Contents