No Spark At Spark Plug - KYMCO DINK 125 Service Manual

1. GENERAL INFORMATION

NO SPARK AT SPARK PLUG

Inspection/Adjustment
Replace with a new
spark plug and inspect
again
Check spark plug cap
and high-tension wire
for looseness
Check ignition unit
coupler for looseness
Measure resistance
between terminals of
ignition unit coupler
Check related parts
Check ignition unit
with a ignition unit
tester
Check ignition coil with
a ignition unit tester
Symptom
Weak or no spark
Not loose
Good
Normal
Normal
Normal
Abnormal
Good spark
Loose
Good
Abnormal
Abnormal
Abnormal
DINK 50/125
Probable Cause
Faulty spark plug
Faulty spark plug
Poorly connected coupler
Faulty ignition switch
Faulty exciter coil
Faulty pulser coil
Faulty ignition coil
Broken wire harness
Poorly connected coupler
Faulty ignition unit
Faulty ignition coil
1-42