Left Crankcase Cover (Dink 125) Assembly - KYMCO DINK 125 Service Manual

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Inspect the kick starter spindle and starter
driven gear forcing parts for wear or damage.
ASSEMBLY
Apply grease to the spindle gear shaft.
Install the kick starter spindle bushings into
the left crankcase cover.
Install return spring and spindle gear into the
left crankcase cover.
＊
When installing the return spring, use a
screw driver to press the inward and
outward return spring hooks into their
original positions respectively.
Apply grease to the driven gear shaft.
Install the washer onto the left crankcase
cover.
Install the starter driven gear and friction
spring as the figure shown.
8-9
Kick Starter Spindle Forcing Part
Starter Driven Gear Shaft Forcing Part
Plastic Bushing
Bushing
Kick Starter Spindle
Washer
Starter Driven Gear
DINK 50/125
Return Spring
Friction Spring