Cylinder Head Disassembly; Cylinder Head Assembly - KYMCO PEOPLE 125 Manual

7
. CYLINDER HEAD/VALVES
Remove the two cylinder head bolts.
Remove the cylinder head.
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket remnants from the cylinder
surface.
＊
• Avoid damaging the cylinder contact
surface.
• Be careful not to drop any gasket
remnants into the engine.

CYLINDER HEAD DISASSEMBLY

Remove the valve spring cotters, retainers,
springs, spring seats and valve stem seals
using a valve spring compressor.
＊
Be sure to compress the valve
•
springs with a valve spring compressor.
Mark all disassembled parts to
•
ensure correct reassemble.
Special
Valve Spring Compressor
Valve Spring Compressor Attachment
www.PlanDeGraissage.org
Cylinder Head
Dowel Pins
Valve Spring Compressor
Valve Spring Compressor Attachment
PEOPL E 125/150
Bolts
Cylinder Head Gasket
Cam Chain Guide
7-8