Steering Stem - Honda Metropolitan CHF50 Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Be careful not to Remove the cable clamps, bolt and equalizer box
bend the tab of the cover.
cover during
removal.
Remove the front brake arm adjusting nut and rear
brake arm adjusting nut.
Disconnect the front brake cable and rear brake
cable from the equalizer box.
Loosen the lock nut of the left and right brake cable
and remove the adjust bolts from the equalizer box.
Remove the equalizer from the equalizer box and
disconnect the left, front and rear brake cables from
the equalizer.
Disconnect the right brake cable from the equalizer
and remove the spring.
Installation is in the reverse order of removal.
NOTE:
• Apply silicone grease to the sliding surface of the
equalizer.
• Connect the left and right brake cables into the
equalizer with the paint marks facing the cover.
• Set the stopper tab of the equalizer through the
hole of the equalizer cover.
• Apply a locking agent to the equalizer cover bolt
threads.
TORQUE: 12 N m (1.2 kgf-m, 9 Ibfft)
• Adjust the brake cables before leg shield installa-
tion (page 3-17).
STEERING STEM
REMOVAL
Remove the fork (page 13-13).
Remove the handlebar (page 13-17).
Remove the steering stem lock nut using the special
tool.
TOOLS:
Socket wrench, 32 mm
Remove the lock washer.
07916-KM10000
EQUALIZER COVER
BOLT
CLAMP
CLAMP
LEFT BRAKE CABLE RIGHT BRAKE CABLE
ADJUST BOLT
P A I N T • & LOCK NUT
MARKS rXi Ik
L
SPRING
REAR BRAKE
CABLE
FRONT BRAKE CABLE
STOPPER
SOCKET WRENCH
13-21