Exporting Backup Settings To An External Device; Importing A File From An External Device To Restore Settings; Restoring Projector Default Settings - Christie Mirage 4K40-RGB User Manual

9. Reboot the projector.
10. Repeat steps 3 to 9 for each additional projector.

Exporting backup settings to an external device

Save the Mirage 4K40-RGB settings to a USB flash drive (projector) or file (web interface).
1. If using the display panel to export settings, insert a USB flash drive (properly formatted as
FAT) into the USB port on Mirage 4K40-RGB.
2. Select MENU > Admin > Backup & Restore.
3. Select the backup option.
• On the projector, select Backup to USB.
• On the web interface, select Backup to File.
A default name is assigned.
4. To edit the backup file name, select the up arrow and select Enter.
5. To save the name, navigate down and select SAVE.
The backup file is exported.
Importing a file from an external device to
restore settings
Restore backed up files, stored on a USB flash drive (projector) or file (web interface), onto the
projector.
1. If using the display panel to import the file, insert the USB flash drive containing the backup
file into the USB port on the projector.
2. Select MENU > Admin > Backup & Restore.
3. Select the restore option.
• On the projector, select Restore from USB.
• On the web interface, select Restore from File.
4. From the File Selection dialog, select a file to restore.
The backup settings file is imported to the projector.

Restoring projector default settings

Restore the Mirage 4K40-RGB settings back to the default values. Network configurations and
calibration values are not reset.
1. From the display panel, select MENU > Admin > Backup & Restore.
2. Select .
All customized settings are set to the default Mirage 4K40-RGB settings.
Mirage 4K40-RGB User Guide
020-103015-05 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Backing up, restoring, and upgrading files
54