Active Stereo 3D Configuration - Christie Griffyn 4K32-RGB Installation And Setup Manual

Active stereo 3D configuration

Use the following diagram to understand a typical hardware configuration for active stereo 3D
systems.
• A—Server/PC with stereo 3D-capable video sources
• B—L/R sync signal (3D-direct input only)
• C—3D direct or 3D dual-input connections
• D—3D stereo synch cable
• E—IR emitter
• F—Active glasses
In response to the 3D Sync Out signal from the projector, the IR emitter emits an infrared signal to a
receiver in the active 3D shutter glasses. This synchronizes the active glasses to alternatively open and
close for the active stereo 3D applications.
Griffyn 4K32-RGB Installation and Setup Guide
020-103314-05 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
3D setup
70