Table of Contents
Advertisement
Active stereo 3D configuration
Use the following diagram to understand a typical hardware configuration for active stereo 3D
systems.
•
A—Server/PC with stereo 3D-capable video sources
•
B—L/R sync signal (3D-direct input only)
•
C—3D direct or 3D dual-input connections
•
D—3D stereo synch cable
•
E—IR emitter
•
F—Active glasses
In response to the 3D Sync Out signal from the projector, the IR emitter emits an infrared signal to a
receiver in the active 3D shutter glasses. This synchronizes the active glasses to alternatively open and
close for the active stereo 3D applications.
Christie Griffyn Series Installation and Setup Guide
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
3D setup
80
Advertisement
Table of Contents
