Active stereo 3D configuration
Use the following diagram to understand a typical hardware configuration for active stereo 3D
systems.
In response to the 3D Sync Out signal from the projector, the IR emitter emits an infrared signal to a
receiver in the active 3D shutter glasses. This synchronizes the active glasses to alternatively open and
close for the active stereo 3D applications.
Passive stereo 3D configuration
Use the following diagram to understand a typical hardware configuration for passive stereo 3D
systems.
Mirage 304K (Bm.1) Installation and Setup Guide
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
3D setup for Mirage projectors
45