Display 3D Diagnostic Test Patterns; Verify 3D Cinema Content - Christie CP2215 User Manual

View 3D Content
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

Display 3D Diagnostic Test Patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Test Patterns.
4. Tap a test pattern.
5. Put on a pair of 3D glasses.
6. Look at the on-screen image, and then close your left eye and look at the image through your
right eye. Switch when the image alternates.
3D Test Pattern
RGB-12bit -3D Dynamic Range
RGB-12bit-3D Four Quadrant
RGB-12bit-3D Full White
RGB-12bit-3D Half Descending
RGB-12bit-3D Horizontal Ramp
RGB-12bit-3D L-Pattern

Verify 3D Cinema Content

1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly.
4. If the image is reversed:
a. Tap Menu > Channel Setup on the projector touch pad controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted in the 3D Sync Polarity list.
70
Action
Alternates between 2 images.
Alternates between 2 images.
Alternates between 2 100% white images.
Alternates between 4 images.
Alternates between 2 horizontal ramp images.
Alternates between 2 images.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)