Display 3D Diagnostic Test Patterns - Christie CP 2210 User Manual

d. Select True in the 3D Sync Polarity list.
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

4.11.8 Display 3D Diagnostic Test Patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Test Patterns.
4. Tap a test pattern.
5. Put on a pair of 3D glasses.
6. Look at the on-screen image, and then close your left eye and look at the image through your right eye.
Switch when the image alternates.
3D Test Pattern
RGB-12bit -3D Dynamic Range
RGB-12bit-3D Four Quadrant
RGB-12bit-3D Full White
RGB-12bit-3D Half Descending
RGB-12bit-3D Horizontal Ramp
RGB-12bit-3D L-Pattern
100% black field with 100% white (TL),
red (TR), green (BR), blue (BL) boxes
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Action
Alternates between 2 images shown in Figure 4-6.
Alternates between 2 images shown in Figure 4-7.
Alternates between 2 100% white images.
Alternates between 4 images shown in Figure 4-8.
Alternates between 2 horizontal ramp images.
Alternates between 2 images shown in Figure 4-9.
Figure 4-6 RGB-12 bit -3D Dynamic Range Test Pattern
Section 4: Adjusting the Image
100% black field with 100% red (TL),
white (TR), blue (BR), green (BL) boxes
4-9