Edit The 3D Scope 2048 X 858 Channel; Display 3D Diagnostic Test Patterns - Christie CP4230 User Manual

Section 4: Adjust the Image
b. Select 6:2 in the Frame Rate N:M list.
c. Select Left (L1R1 L2R2) in the L/R Display Sequence list.
d. Select True in the 3D Sync Polarity list.
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

4.14.7 Edit the 3D Scope 2048 x 858 Channel

1. Tap Menu > Channel Setup.
2. Select 3D Scope 2048x858 in the Channel Name list.
3. Tap Config 1 in the left pane and edit these settings:
a. Select 292-Dual in the Input list.
b. Select YCrCb 4:2:2 10 bits x2 in the Data Format list.
c. Select 2048x858 2.39 Scope in the Source File list.
d. Select Scope in the Screen File list.
4. Tap Config 2 in the left pane and edit these settings:
a. Select 3D Onsite in the Measured Color list. If this option is not available, see Section 4.14.5: Define
a Measured Color Gamut Data File.
b. Select DC28_DCIXYZE_314_351 in the Target Color list.
c. Select YCxCz Inverse ICT in the Color Space list.
d. Select Gamma 2.6 in the Gamma list.
e. Select Linear_9x9x9 in the LUT-CLUT list.
5. Tap 3D Control in the left pane and edit these settings:
a. Select Line Interleave in the 3D Sync Input Mode list.
b. Select 6:2 in the Frame Rate N:M list.
c. Select Left (L1R1 L2R2) in the L/R Display Sequence list.
d. Select True in the 3D Sync Polarity list.
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

4.14.8 Display 3D Diagnostic Test Patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Test Patterns.
4. Tap a test pattern.
4-10
Downloaded From projector-manual.com Christie Manuals
CP4230 User Manual
020-100621-02 Rev. 1 (1-2012)