Data Transfer; Application Software - Oce CS 5050 User Manual

Prime, clean, calibrate, or replace cartridges.
Set wiper function to off.
Portions of lines are missing
Prime, clean, calibrate, or replace cartridges.
Clean service station; clean cartridge again; repeat prime.
Clean carriage flex cable and cartridge electrical contacts; repeat prime. Do
not use alcohol, acetone, or other cleansers. Use a cotton swab moistened in
distilled water. Use tap water if distilled water is not available.
Poor vertical or horizontal line quality
Perform colour calibration (see 'Calibrating cartridges' on page 35).

Data transfer

Printer does not generate a print
Make sure that your printer is connected to the port to which you are sending
the file.
If you are printing over a network, determine whether the problem comes
from the network. Try connecting the printer directly to your computer and
send the file again.
Parallel printing doesn't work
Try using another parallel cable. Check that it is securely connected.

Application software

Isolating a software problem
Try printing the "Demo Plot" on the Utilities disk. If this prints, the printer's
health is probably good.
Try printing a simple file from your application or from another application.
If this prints correctly, the problem may be with your use of software.
104 Océ CS 5050/5070 User Manual