From (Setting The Sender's Address) - Fuji Xerox ApeosPort-VI C7771 User Manualline

Scan
E-mail Address
To change the e-mail address, select [E-mail Address] and enter a new address on the
displayed keyboard.
Name
To change the recipient name, select [Name] and enter a new name on the displayed
keyboard.
When you specify a recipient from the Address Book and the recipient name is registered in
the Address Book, that recipient name is displayed.
S/MIME Certificate
Certificates which is linked to the e-mail address is displayed.
If S/MIME is enabled, and a certificate is linked to the e-mail address, you can check the
contents of the S/MIME certificate by selecting [S/MIME Certificate].
Note
Reference

From (Setting the Sender's Address)

5
Specify a sender's e-mail address. You can specify only one address as a sender's address.
Note
Reference
1
Select [From].
336
This feature is supported only by the ApeosPort series models.
For information on S/MIME communication, refer to "Encryption and Digital Signature Settings" > "Configuration of E-mail
Encryption/Digital Signature" in the Administrator Guide.
When [Login to Local Accounts] is selected, the e-mail address registered in user information is automatically
set as a sender's address. For more information on user information, refer to "Tools" > "Accounting" > "Create/
View User Accounts" in the Administrator Guide.
[From] may not be editable depending on the setting in the System Administration mode.
When you send an e-mail with a digital signature, the items used in the signature are different depending on
the settings in the System Administration mode.
For information on a digital signature, refer to "Encryption and Digital Signature Settings" > "Configuration of E-mail Encryption/
Digital Signature" in the Administrator Guide.