Changing The Language; Display Functions - Eaton BladeUPS User Manual

Table 10 shows the indicator icons and provides indicator status and descriptions.
Table 10. Indicator and Status Description
Indicator Status
On
UPS OPERATION
Flashing
MODE
Green
Off
BATTERY MODE On
Yellow
BYPASS MODE On
Yellow
ACTIVE ALARM MODE On
Flashing
Red

Changing the Language

Press and hold the first button on the left for approximately five seconds to select the language menu. This
action is possible from any LCD menu screen.

Display Functions

The LCD displays the Start screen at startup. During operation, the Start screen also displays after 15 minutes
of inactivity. The display is user-selectable: the default is the Eaton logo, but this can be changed to the Mimic
screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press any button to restore the screen.
Press any button to activate the menu options. Use the two middle buttons ( and ) to scroll through the menu
structure. Press the button to enter a submenu. Press the
ESC
button to cancel or return to the previous menu.
Table 11 shows the basic menu structure.
NOTE Menu functions related to parallel systems appear only on paralleled UPSs.
Eaton BladeUPS 5.1 kVA to 60 kVA (N+1) User's Guide 164201649—Rev 9 www.eaton.com/powerquality
Description
The UPS is operating normally.
The UPS is starting up or is shut down and waiting for power to return.
l
A new information message is active.
l
Bypass is not available.
l
The UPS is turned off and will not turn on automatically.
The UPS is in Battery mode.
The UPS is in Bypass mode.
The UPS has an active alarm.
There is a new UPS alarm condition. See "Troubleshooting" on page 135 for additional
information.
button to select an option. Press the
Operation
94