Eaton BladeUPS User Manual page 127

Figure 82. Installing the UPS Battery Trays (Two Battery Strings)
Figure 83. Installing the UPS Single-string Battery Trays for 5.1 kVA BladeUPS
7 . Reinstall the battery cover plate.
8. Replace the UPS front cover (see Figure 84):
Plug the LCD cable from the control panel on the front cover into the connector on the electronics
module. Use care to loop the LCD cable gently in front of the electronics module.
Push the top of the front cover firmly into place, and then push the bottom firmly into place.
NOTE Reconnecting the control panel to the electronics module automatically transfers
the UPS to Normal mode.
Eaton BladeUPS 5.1 kVA to 60 kVA (N+1) User's Guide 164201649—Rev 9 www.eaton.com/powerquality
UPS Maintenance
123