Eaton BladeUPS User Manual page 2

Class A EMC Statements
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the interference at his
own expense.
ICES-003
This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing
Equipment Regulations ICES-003.
Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du
Canada.
EN 62040-2
Some configurations are classified under EN 62040-2 as "Class-A UPS for Unrestricted Sales Distribution. " For
these configurations, the following applies:
This is a Class A-UPS Product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take additional measures.
Eaton is are registered trademarks Eaton Corporation or its subsidiaries and affiliates. Phillips and Pozidriv are
a registered trademarks of Phillips Screw Company. National Electrical Code and NEC are registered
trademarks of National Fire Protection Association, Inc. All other trademarks are properties of their respective
companies.
©Copyright 2007–2013 Eaton Corporation, Raleigh NC, USA. All rights reserved. No part of this document may
be reproduced in any way without the express written approval of Eaton Corporation.
WARNING