Eaton BladeUPS User Manual page 10

The following accessories for the BladeUPS are available:
Maintenance Bypass Module (MBM) to safely service the UPS without disrupting power.
l
External Battery Interconnect to connect a customer-supplied external battery to the UPS for extended
l
runtime.
EBM for extended runtime.
l
NOTE Install up to four EBMs per UPS. Each EBM includes a 0.9m (3 ft) connector cable. A
0.9m (3 ft) battery extension cable is also available.
X-Slot cards with enhanced communication capabilities for network connectivity with monitoring and
l ®
control.
The BladeUPS Bar for parallel systems, mounted in the rear of an Eaton rack, provides the required input and
output connections for the paralleled UPSs and has system-rated input and output connections. Figure 3 shows
an example of a BladeUPS parallel system.
The BladeUPS system can be installed with Eaton remote power panels, transformer cabinet with bypass and
distribution, and rack-mounted power distribution systems.
BladeUP Bar
Bottom Entry
Wireway
Figure 3. Example of a BladeUPS Parallel System
Eaton BladeUPS 5.1 kVA to 60 kVA (N+1) User's Guide 164201649—Rev 9 www.eaton.com/powerquality
BladeUP Module
BladeUP Module
BladeUP Module
Introduction
3