Changing The Language; Display Functions - Eaton 9355 User Manual

OPERATION
Indicator Status
On
Green Flashing
Off
On
Yellow
On
Yellow
On
Flashing
Red
56
Eaton 9355 Parallel UPS (10/15 kVA) User's Guide
The following table shows the indicator status and description.
Description
The UPS is operating normally.
S The UPS is starting up or is shut down and waiting for power to return.
S A new information message is active.
S Bypass is not available.
The UPS is turned off and will not turn on automatically.
The UPS is in Battery mode.
The UPS is in Bypass mode.
The UPS has an active alarm.
There is a new UPS alarm condition. See "Troubleshooting" on page 67 for
additional information.

Changing the Language

Press and hold the first button on the left for approximately five seconds
to select the language menu. This action is possible from any LCD menu
screen.

Display Functions

As the default or after 15 minutes of inactivity, the LCD displays the
selectable startup screen. The default is the Eaton logo and can be
changed to the Mimic screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press
any button to restore the screen.
Use the two middle buttons ( and ) to scroll through the menu
structure. Press the
to select an option. Press the
previous menu.
button to enter a submenu. Press the
button to cancel or return to the
ESC
S 164201601 Rev D www.eaton.com/powerquality
button