Changing The Language - Eaton Powerware 9140 User Manual

OPERATION
The following table shows the indicator status and description.
Indicator Status
On
Green Slow Flash
Fast Flash
Off
On
Slow Flash
Yellow Yellow
Fast Flash
On
Slow Flash
Yellow
On
Red
Slow Flash
All LEDs Slow Flash
Cycling

Changing the Language

To change the language setting, select MENU from the system status
screen, then select SETUP, USER SETUP, and LANGUAGE. Scroll
through the available options and press the
language.
58
EATON Powerware
Description
The UPS is operating normally.
The UPS is in Standby mode.
The UPS is starting up.
The UPS is turned off and will not turn on automatically.
The UPS is in Battery mode.
The UPS is in Battery mode and a Low Battery condition is detected.
A battery test is in progress.
The UPS is in Bypass mode.
Bypass mode in unavailable because the input utility is outside the configured
bypass range.
The UPS has an active critical alarm and is not supporting the load.
See "Troubleshooting" on page 89 for additional information.
The UPS has an active warning alarm and is supporting the load.
See "Troubleshooting" on page 89 for additional information.
The UPS is powering down and the load is no longer supported.
A UPS flash upgrade is in progress.
®
9140 UPS (7.5–10 kVA) User's Guide
button to select the
S
164201622 Rev A FINAL DRAFT 14-Jul-2006