Pallet Front
Note: Battery cartons for five and six UP systems only.
Figure 5. Moving the Battery Pallet
NOTE
You will install the batteries in the top two UPS cabinets after the system is installed
in the final location (described in "Installing the UPS Internal Batteries" on page 30).
7 .
Continue to the"Installing the Ramp" section.
Eaton BladeUPS 5.1 kVA to 60 kVA (N+1) User's Guide 164201649—Rev 9 www.eaton.com/powerquality
Preassembled System Installation
Pallet Rear
20