Peripheral Device/Adapter Problems - Gateway 910 Series System Manual

Peripheral device/adapter problems

The server does not recognize a SCSI device
Probable cause
The device needs to be
added as new hardware
The SCSI ID may be invalid
The SCSI chain is not
terminated
The device cables are not
installed correctly
The server does not recognize the diskette drive
Probable cause
The diskette drive may be
configured incorrectly
The drive cables are not
connected properly
Solution
In the Control Panel window (Start | Settings |
Control Panel), double-click Add/Remove
Hardware. Follow the on-screen instructions
for adding the device.
Assign an available SCSI ID to the device.
Make sure the last device on the SCSI chain
is terminated.
Open the server and make sure all cables
between the controller and the device are
installed correctly.
Solution
Restart your server, then press F1 to open the
BIOS Setup utility. In the Boot | Removable
Devices menu, make sure that the diskette
drive parameters are set correctly.
Open the server and make sure all cables are
correctly connected to the controller card.
Some servers do not have a floppy (diskette)
controller card because the floppy controller is
built into the system board.
Peripheral device/adapter problems
79