A Safety, Regulatory, And Legal Information; Important Safety Information - Gateway 910 Series System Manual

Safety,
Regulatory, and
Legal Information

Important safety information

Your Gateway system is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product it is important that the safety
instructions marked on the product and in the documentation are followed.
Warning
Setting up your system
Read and follow all instructions marked on the product and in the documentation before you
operate your server. Retain all safety and operating instructions for future use.
Do not use this product near water or a heat source such as a radiator.
Make sure you set up the server on a stable work surface.
The product should only be operated from the type of power source indicated on the rating
label.
If your server has a voltage selector switch, ensure that the switch is in the proper position for
your area. The voltage selector switch is set at the factory to the correct voltage.
Openings in the server case are provided for ventilation. Do not block or cover these openings.
Make sure you provide adequate space, at least 12 inches (30 cm), around the server for
ventilation when you set up your work area. Never insert objects of any kind into the servers
ventilation slots.
Some products are equipped with a three wire power cord to ensure that the product is properly
grounded when in use. The plug on this cord will only fit into a grounding-type outlet. This
is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician to
install the appropriate outlet.
Always follow these instructions to help guard against
personal injury and damage to your Gateway server.
Important safety information
A
93