Memory And Processor Problems - Gateway 910 Series System Manual

Memory and processor problems

The server detected memory errors during start up
Probable cause
The memory was installed
incorrectly
A DIMM is faulty
The server does not recognize a new processor
Probable cause
The processor was installed
incorrectly
The heatsink may not be
installed properly.
Solution
Make sure the memory is seated and oriented
correctly.
Replace the faulty DIMM. Third-party
diagnostic programs can help determine which
DIMM is failing.
Solution
Check the installation. Make sure the
processor is fully seated in its socket. The
processor should be recognized automatically
if it was installed correctly.
Reseat the heatsink.
Memory and processor problems
77