System Setup; Setting Up Your Server - Gateway 910 Series System Manual

Setting up your server

Use the instructions on the poster that came with your server to set up your
hardware.
You can improve the safety of your working environment before setting up
your hardware by following these guidelines:
Use a clean, flat, and stable surface for your server. Allow at least 12 inches
at the rear of the server for cabling and air circulation.
Obtain a grounded (three-prong) AC surge-protected power strip. A
surge-protected power strip helps protect against AC power fluctuations.
Protect your server from extreme temperature and humidity. Do not
expose your server to direct sunlight, heater ducts, or other
heat-generating objects.
Keep your server away from equipment that generates magnetic fields,
such as unshielded stereo speakers. Even a telephone placed too close to
the server may cause interference.
Plug the server into a wall outlet or power strip that is easily accessible.
Important Keep the server boxes and packing material in case you
need to send the server to Gateway for repairs. If you
return your server in different packaging, your warranty
may be voided.
2
Setting up your server
9