Gateway 910 Series System Manual page 47

4
If necessary, carefully move the cables aside to gain access to the DIMMs.
5
Remove the DIMM by pressing down on the socket latch on each side
of the DIMM socket, then gently pull the DIMM out of the socket. Store
the DIMM in an antistatic container.
Socket latch
Socket
6
Align the two notches in the DIMM with the two notches in the DIMM
socket, then insert the new DIMM into the socket.
Socket notches
7
Gently press the DIMM into the socket until it is firmly seated. Inserting
the DIMM automatically locks the socket latch on each end of the DIMM.
8
Reinstall the cover panel. (See "Reinstalling the cover panel" on page 22.)
9
Reconnect external devices, the power cord(s), and the modem cable (if
installed), then turn on the server.
Replacing or adding memory
39