System Specifications - Gateway 910 Series System Manual

System specifications

The following specifications reflect the basic capabilities of the server. Your
server may contain optional equipment that uses some of the resources
described below or which provides additional resources. All specifications are
subject to change.
Processor
Chipset
RAM capacity
BIOS
IDE interfaces
Diskette drive
I/O ports
Expansion Slots
Power Supply
Certification
106
Reference Data
® ™
One Intel Celeron or Pentium
133 MHz front side bus.
™
Serverworks Champion LC chip set.
Four DIMM sockets on the system board support, PC133
Synchronous Dynamic Random Access Memory (SDRAM)
DIMMs. Maximum memory is 2 GB.
Flash BIOS for easy updates from diskette.
Supports as many as four ATAPI/IDE devices (hard drives, CD
drives, LS-120 drives) using two onboard ATA 100 controllers.
(The chassis provides space for as many as three ATAPI/IDE
devices and a diskette drive.)
Diskette controller integrated on the system board.
One parallel port, one serial port, four USB ports, one video port,
one LAN port, one PS/2 keyboard port, and one PS/2 mouse port.
The parallel and serial ports are configurable through System
Setup. No jumper settings are required.
Five full-length PCI slots.
250 watts. ATX power connector for easy power cable
changeover.
FCC Class B, VCCI, C-Tick, UL, cUL, CE, GS.
™
III, processor with 100 or