Peripheral/Adapter Problems - Gateway ALR 8200 Maintaining And Troubleshooting

86 Maintaining and Troubleshooting the Gateway ALR 8200 Server

Peripheral/adapter problems

A SCSI device is not recognized by the system.
Probable Cause
The device needs to
be added as new
hardware.
The SCSI ID may be
invalid.
The SCSI chain is not
terminated.
The device cables are
not installed correctly.
The diskette drive is not recognized by the system.
Probable Cause
The diskette drive may
be configured
incorrectly.
The drive cables are
not connected
properly.
The drive controller is
not seated properly.
Solution
From the Control Panel window
Settings | Control Panel),
Follow the directions for adding the
Hardware.
device. If you are not experienced with this
procedure, call Technical Support.
Assign an available SCSI ID to the device.
Make certain the last device on the SCSI chain
is terminated.
Open the system and check all cables between
the controller and the device.
Solution
Restart your computer, and then press
enter the setup program. From the
menu, ensure that the diskette
Floppy Options
drive settings are correct.
Open the system and check all cables
connected to the controller card.
Open the system and reseat the drive
controller.
(Start |
double-click
Add New
F
to
1
Main |